Views: 0 Author: Site Editor Publish Time: 2025-08-04 Origin: Site
The workflow of an intermediate frequency inverter spot welding machine usually includes the following basic steps:
Before spot welding, it is necessary to prepare the welding equipment and workpiece, including checking the equipment status, confirming welding parameters, cleaning the workpiece surface, etc.
Clamp the workpiece to be welded onto the welding table or fixture to ensure stability during the welding process.
Set appropriate welding parameters based on welding requirements and workpiece materials, including current, time, pressure, etc.
Start the intermediate frequency inverter spot welding machine to trigger the welding action. Usually triggered through foot switches or automatic control systems.
The electrode descends to the surface of the workpiece, applying a certain pressure to form contact between the electrode and the workpiece. Subsequently, the set welding current flows between the electrode and the workpiece, generating resistance heat that locally melts the workpiece and forms a welding point.
After a certain welding time, stop the welding current, lift the electrode, and start the cooling and solidification process of the welding point. This usually requires a certain cooling time to ensure the solidification and stability of the welding point.
Inspect the welding points to ensure that the welding quality meets the requirements. If necessary, carry out subsequent processing such as polishing, cleaning, painting, etc.
These steps are the basic steps of the working process of the intermediate frequency inverter spot welding machine, and the specific operation and process may vary depending on different welding requirements and equipment configurations.
If you have welding machine requirements, please contact Ms. Zhao
E-Mail: pdkj@gd-pw.com
Phone: +86-13631765713
